Giini_Pyro_black_lrear-3qtr_R247G247B247_4000x3000px.jpg

ACTIVE TENSION TECHNOLOGY

Traditional stomp pads rely on friction.
The Giini Pyro relies on physics.
Giini_Pyro_lilac_rear-3qtr_R247G247B247_4000x3000px.jpg

Sidewall Grip

We don't just sit under your boot; we grab the sides. The U-shape chassis guides your foot into the sweet spot every time, even without looking.
Giini_Pyro_lilac_right-side-rear-3qtr_R247G247B247_4000x3000px.jpg

Spring-Loaded

Flexible rubber bumpers apply active pressure to your boot. As you step in, they expand and lock you in place. It’s a bear hug for your boot.
Giini_Pyro_lilac_topdown_R247G247B247_4000x3000px.jpg

Snow Shedding

The open design prevents snow from packing in. While other pads turn into ice rinks, the Pyro stays clear and ready to grip.
No drills. No jigs. No garage required.

INSTALL IN 60 SECONDS

Step 1: PREP THE DECK. Clean the area in front of your rear binding with an alcohol wipe. It needs to be dry and room temperature (don't do this in the parking lot at -10°).

Step 2: PEEL & STICK. Remove the industrial adhesive backing. Center the Giini Pyro between your bindings.

Step 3: CURE. Press down firmly for 30 seconds. Let it bond for 24 hours before riding for maximum strength.

Install.jpg

TWO WAYS TO RIDE

  1. The Exit Strategy. As you glide off the lift, step your back foot into the Pyro. The bumpers engage instantly, giving you the leverage to steer, stop, and weave through traffic without the "penguin wobble."

  2. One-Footed Control. Want to tweak a grab or fast-plant? The sidewall grip lets you lift the board with your unstrapped foot, unlocking tricks that flat pads can't handle.
male-snowboarder-freerider-in-a-red-suit-riding-fr-2025-01-16-23-24-19-utc.jpg

READY TO UPGRADE?

SHOP THE COLLECTION