1 5

Giini Pyro Hyper Blue

$39.99 USD $39.99 USD
Shipping calculated at checkout.
> In stock
We accept
  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Description

The Giini Pyro is a mechanical snowboard traction device that replaces foam stomp pads. Spring-loaded bumpers grip your boot sidewall the instant you weight the board — an active mechanical hold where a foam pad just hopes for friction.

Hyper Blue is turned up to eleven. An electric, saturated blue with zero chill, built for riders whose kit does the talking before they drop in. It reads loud from the chairlift and louder in photos — and the grip underneath backs up every bit of the noise.

Universal fit for any boot brand or size, goofy or regular. Peel-and-stick install in under a minute with industrial 3M VHB adhesive, rated to -40°. If it doesn't change your ride, we'll make it right.
Share

Foam vs. Pyro. Not a fair fight.

Round Foam pad Giini Pyro
Wet grip Fails when iced Mechanical — unaffected
Snow buildup Packs in, then polishes Open chassis sheds it
Connection Hope plus friction Spring-loaded lock
One-footed control None Steer on edge
Lifespan 1–2 seasons Transfers to your next board

Same spring-loaded chassis under every colorway.

The numbers

Every measurement, no fine print

Width
174 mm / 6.85 in
Depth
119 mm / 4.69 in
Height
35 mm / 1.38 in
Grip system
Active Tension — spring-loaded
Adhesive
3M VHB industrial
Origin
Made in USA
  • -40° rated
  • 3M VHB
  • Hardware, not a sticker

Asked constantly

Questions, answered

Does the Pyro interfere with riding when strapped in?

No. It sits between your bindings, an area that rarely contacts the snow during normal riding. The profile is low enough not to drag while carving and high enough to engage your boot when skating.

Will it damage my boots?

No. The bumpers that grip your boot are made of durable, non-abrasive rubber. They apply pressure to the sidewall of your sole, the toughest part of the boot, and leave no marks.

Can I move it to a new board?

Yes. The hardware transfers; the adhesive is single-use for maximum bond strength. To move it, warm the adhesive with a hair dryer, saw behind the device with dental floss, clean the residue with rubbing alcohol, and reinstall with a fresh strip of 3M VHB tape from any hardware store.

Why does it cost more than a foam pad?

Because it isn't one. A foam pad is a single piece of die-cut sticker foam. The Pyro is an assembly of molded composite parts, springs, and high-grade rubber, manufactured in the USA. Foam gets replaced every season or two. This gets transferred to your next board.

Other colorways